Trackit supports markers with an inner diameter of 10.0 mm and an outer diameter of 13.0 mm.
(1) Power adapter: 4.5 m
(2) PC Cable (connects Tracker and PC): 6 m
(3) Scanner Cable (connects Tracker and Scanner): 6 m
(4) Scanner Gimbal Cable (connects Tracker and Scanner gimbal): 6 m
(5) Tracker Gimbal Cable (connects Tracker and Tracker gimbal): 0.4 m
When using the Scanner in Marker Scan mode, markers must be placed on the object's surface for frame alignment. Markers can also be used alongside anchor blocks as common global point coordinates during a Multi-position Scan.
Anchor blocks are used in the “Multi-position Scan” mode. Position the blocks on the object's surface to establish reference points for the Tracker. Just five common global marker coordinates are required between neighboring scanning areas to quickly merge data from two stations.
Trackit SR comes with magnetic markers of 10.0 mm inner diameter and 13.0 mm outer diameter.
(1) Power adapter: 4.5 m
(2) Tracker PC Cable (connects Tracker and PC): 4 m
(3) Scanner PC Cable (connects Scanner to PC): 3 m
(4) Scanner Cable (connects Tracker and Scanner): 6 m
(5) Scanner Gimbal Cable (connects Tracker and Scanner gimbal): 6 m
Markers are needed in the following two scenarios:
1) When using the Scanner as a standalone 3D scanner in Marker Scan mode, markers must be placed on the object's surface for frame alignment.
2) When using the Trackit SR in multi-position scan mode, markers serve as global marker coordinates for data alignment when repositioning the Tracker.